The man-made climate crisis will become a climate catastrophe if we do not drastically reduce greenhouse gas emissions. Extreme weather events such as storms, heat and drought are already increasing rapidly. Energy generation is the number one source of CO2 emissions in Germany.
Thanks to our latest innovation, this will soon be a thing of the past. We have developed a simple printing process that can produce heat, cold, light and electricity, all in the highest quality and as a climate-neutral manufacturing process.

The basis for this is a modified printing process. In a fully automated production process, almost all flat surfaces can be coated with a special paste and these can be made to heat, cool, light, darken, become an electricity storage device or solar module, or simply combined with each other!
The production and all technical processes are monitored, the CO2 emission is climate-neutral and causes no pollution to the environment. The production is completely ISO-9001 certified and therefore meets all requirements.

The coating paste is extremely inexpensive and does completely without rare earths and metals. No substances containing toxins are used. This means that the products are absolutely harmless to health and there is no hazardous waste in the event of subsequent disposal.
The light has a very low power consumption and is glare and flicker-free. Darkening or brightening can be easily controlled. The efficiency is well over 90 percent. Luminous intensities of over 1,000 candelas/m² are conceivable and the operating time is currently around 50,000 hours.

Temperatures of 28 to 600 degrees Celsius are possible even with layer thicknesses of less than 15 thousandths of a millimetre. The efficiency is at a tested efficiency of 100 % !

The novelty of the products is the production of electricity even in low light conditions. With an average of 75 watts per m² from dawn to dusk, a daily production of more than 500 watts per m² is possible even in the winter months. This means that such solar modules can also be used in countries where it was previously not profitable to use conventional solar modules.

The solar elements can be produced in any colour. They can be used as roof or facade cladding or can be mounted on any freely available surface. Due to the low layer thickness, these modules integrate themselves into the overall picture and are hardly noticeable.
We are currently examining possible applications for well over a thousand products of the future! Real estate that supplies itself with energy and heat, advertising spaces that light up and do not need electricity, roofs and pavements that remain free of ice and snow in winter and much more – all this is no longer an illusion today!

Welcome to the future! Become a part of it. Become a part of our community!
You can find out more at: www.pluspunktenergie.tech